Scheduled Test Alerts: Users can create new Scheduled Test specific Alert Profiles that can be attached to Scheduled Tests. Users can then receive alerts when an Alert Profile is violated via SMTP, Slack, MS Teams, and Syslog.
Scheduled Test Run Modes: Users can now set Scheduled Tests to run in parallel, serial, or random modes.
Parallel mode is how Scheduled Tests have always previously run with NetBeez and that functionality will continue to be the same where all associated Agents run the Scheduled Test at the same time.
Serial mode will run a Scheduled Test for the associated Agents one after another.
Random mode will run a Scheduled Test for the associated Agents and random intervals within a run window.
IPv6 Ping Tests: Users can now configure ping tests to target endpoints with IPv6 addresses and tell Agents to exclusively use an IPv6 address.
Agent: Errors returns more accurate error message when Iperf encounters a connection issue with Iperf server.
Agent: DNS Monitoring Conditions now can check FQDN as well as IP address.
Agent: Improved check regarding wireless interface dissociation reason to prove a full bounce of the interface.
Agent: PMF is now allowed for WPA2.
Agent: Monitoring Conditions now support checking of host.
Agent: Monitoring Conditions now supports checking if interface.
UI: When Date Picker presents are selected they are now applied immediately and Date Picker closed.
UI: When filtering Monitoring Conditions while using the Scheduled Test wizard, when no matching options appear a message now displays to that affect.
UI: Alert Profiles now allow Decimals for Baseline and Watermark alert types.
UI: The Agent List can now be exported as a CSV.
UI: General Dashboard performance improvements when Dashboard is left open for several hours.
UI: WiFi Performance Buzz tab widget now shows network name.
UI : PMF is now allowed for WPA2 configured WiFi networks.
UI: Users are not automatically navigated to the Remote Worker Agent tab if no Network Agents exist.
UI: Path Analysis Tests now have pause/resume button.
UI: WiFi related tooltips now show network name to help identify between WiFi Networks when WiFi Hopping Groups are used.
UI: Scheduled Test graphs have had animations removed so they could be rendered more quickly.
UI: Responsive hops on Path Analysis graphs now have improved color.
UI: Adds Host and Interface Monitoring Conditions.
UI: When filter Agent Selector component, if no results are returned a message now displays to that affect.
Bug Fixes
Agent: Resolves issue where in some cases Windows Remote Worker Agent configuration file gets wiped.
Agent: Resolves issue where MacOS 14.4 depreciated airport utilities that were used to get MCS, SSID, and BSSID.
Agent: Resolves issue where WPA3 was not being recognized after Agent boot.
Agent: Resolves issue where Mac Remote Worker Agent would fail to install on MacOS 14.0.
Agent: Resolves issue where error was not returned to dashboard with Fast.com is blocked.
Agent: Resolves issue where Iperf2 error for name or service not known was not caught.
API: Resolves issue where in some cases SaaS and Target Templates would return an error on creation attempt.
API: Resolves issue where WiFi tests were not enabled by default when creating SaaS and Target Templates.
API: Resolves issue when filtering Scheduled Tests by Source Agent would return duplicate tests if more than two agents matched the filter.
Server: Resolves issue where Agent interactive console may sometimes send double output.
UI: Resolves issue where Scheduled Test with more than 3 errors causes display issue when popover is shown.
UI: Resolves issue where error message fails to be returned when an ad hoc Traceroute test fails.
UI: Resolves issue where Alerts were rending below Bandwidth graph for Iperf UDP tests.
UI: Resolves issue where Scheduled Test Details would show blank page when viewing source Agents, navigating away from the details page, and then navigating back to it.
UI: Resolves issue where tooltip renders behind the graph bars for VoIP tests.
UI: Resolves issue on Alert filters drawer where selecting multiple options render outside the field instead of scrolling.
UI: Resolves issue where Scheduled Test wizard for Iperf tests would allow for creating of tests without a source selected.
UI: Resolves issue where maximized test graphs on Tests Tab closes on any click instead.
UI: Resolves issue where latency and upload were shown in tooltips for Network Speed Scheduled Tests when Fast.com is the test type.
UI: Resolves issue where latency and upload graphs were shown in the Network Speed Scheduled Test Details when Fast.com is the test type.
UI: Resolves issue where Incident timeline doesn't appear on Agent Details if new Incident opens.
UI: Resolves issue where the associated Agents list was on sorted on a Targets Details.
UI: Resolves issue where clicking a result on a Scheduled Test Results graph would not scroll users down to the Breakdown section.
UI: Resolves issue where Users roles were not being used properly causing the Interactive Console to not be shown regardless if setting enabled Interactive Console for read-only and read-write Users.
UI: Resolves issue where after deleting a Scheduled Tests an error would be shown if the User attempted to go back.
UI: Resolves issue where WiFi Hopping Group Wizard would result in an error when an Agent has null name.
UI: Resolves performance issue when opening a VoIP Scheduled Test Details.
UI: Resolves issue where clicking select all on column manager does not select Logged-In User for Agent List.
UI: Resolves issues where Status dots on Target sidebar did not report correct status.
UI: Resolves issue where test graph will sometimes render outside the bounds of the window.
UI: Resolves issue where Target Performance graph on Buzz tab would sometimes render bar in incorrect place.
UI: Resolves issue where open alerts were not being displayed when test graph was shown.
UI: Resolves issue where Test graphs on Target Details was not responsive.
UI: Resolves issue where Ad hoc tab Agent selector could be come stale and not included all agents.
UI: Resolves issue where Agent IP to Agent ID map may become stale.
UI: Resolves issue where removing CA file from LDAP setting did not clear placeholder text.
UI: Resolves issue form validation issues for DNS Monitoring Condition.
UI: Resolves issue when viewing a test graph JMOS line will still be shown after User selects to hide it.
UI: Resolves issue where filtering Scheduled Tests by destination Agent was not working properly.
UI: Resolves issue where filtering by destination Agent should not be show for Network Speed tests.
UI: Resolves performance issue where Targets were being fetched every time user navigates between Targets List and Details.
UI: Resolves issue where Generating a new report does not stop loading until navigating to a new page.
UI: Resolves issue where WiFi Hopping Group tooltip shows incorrect number of WiFi Networks when viewing an Agent Details without browser refresh.
UI: Resolves issue where sorting be ISP name on Scheduled Network Speed Test was not working.
UI: Resolves issue where WiFi metrics data retention was not being process correctly.
UI: Resolves issue when a NetBeez upgrade is in progress the upgrade in progress modal was not being shown.
UI: Resolves issue where Test grid view real-time Test graphs would disappear.
UI: Resolves issue where Agent field was cut off on Ad hoc tab.
UI: Resolves issue where Target Template Website URL Can Be Longer than 255 Characters.
UI: Resolves issue where extra scrollbars are present when using the Scheduled Test Wizard.
UI: Resolves issue where sorting by alerts on Scheduled Test Details was not working.
0 Comments